Panasonic KX-FC241AL User Manual
3. Preparation
22
3 Preparation
Connections and Set up
3.1 Connections
Important:
L
The unit will not function when there is a
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
power failure. To make calls in emergency
situations, you should connect a
telephone that can function during a
power failure to the telephone line.
3.1.1 Base unit
Caution:
L
When you operate this product, the power
outlet should be near the product and
easily accessible.
outlet should be near the product and
easily accessible.
L
Be sure to use the telephone line cord
included in this unit.
included in this unit.
L
Do not extend the telephone line cord.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the
network condition of the device.
telephone line, this unit may disturb the
network condition of the device.
L
If you use the unit with a computer and your
internet provider instructs you to install a filter
(
internet provider instructs you to install a filter
(
3), please connect the telephone line cord
as follows.
3.1.2 Charger unit
Caution:
L
If the cordless handset is not charged,
you cannot make or answer calls.
you cannot make or answer calls.
L
USE ONLY WITH the included Panasonic
AC adaptor.
AC adaptor.
L
The AC adaptor must remain connected at
all times. (It is normal for the adaptor to
feel warm during use.)
all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
1 Power cord
L
Connect to the power outlet (220 V – 240
V, 50/60 Hz).
V, 50/60 Hz).
2 Telephone line cord
L
Connect to a single telephone line jack.
This model is designed to be used in Australia
and New Zealand. TO USE IN NEW
ZEALAND, CHANGE THE LOCATION
SETTING (feature #74 on page 69).
and New Zealand. TO USE IN NEW
ZEALAND, CHANGE THE LOCATION
SETTING (feature #74 on page 69).
1
2
(For Australian
users)
users)
(For New
Zealand users)
Zealand users)
1 AC adaptor
L
Connect to the power outlet (220 V – 240
V, 50/60 Hz).
V, 50/60 Hz).
2 Hooks
L
Fasten the AC adaptor cord to prevent it
from being disconnected.
from being disconnected.
3
2
1
FC243AL-PFQX2096ZA-en.book Page 22 Thursday, September 30, 2004 3:37 PM