Allied Telesis AT-MC606 User Manual

AT-MC606 VDSL Network Extender Installation Guide

39

3. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR 

position as shown in Figure 13.

Figure 13. Configuring AT-MC606 Ethernet Extender for Provider Mode

4. Go to “Cabling the Provider Unit” on page 41 to connect the cables and 

to “Powering On the Provider Unit” on page 41 for powering the unit.

The AT-MC606 VDSL Network Extender may be wall mounted directly to 
the wall with an AT-WLMT Wall Mount Bracket or by using an Allied 
Telesis DINRAIL Bracket in conjunction with a previously mounted 
DINRAIL. Both of these brackets may be ordered separately from the 
AT-MC606. Please contact your local Allied Telesis representative.

1. Configure the right VDSL CONFIG switch (SCBR/PROV) to the SCBR 

position as shown in Figure 13.

2. Follow the installation instructions supplied with the wall mounting 

bracket or DINRAIL bracket.

3. To connect the cables, see “Cabling the Provider Unit” on page 41.

4. To apply power to the unit, see “Powering On the Provider Unit” on 

1935