Zebra Technologies ZT230 User Manual
147
Troubleshooting
Printer Diagnostics
8/22/12
P1048261-004
FEED + PAUSE Self Test
Performing this self test resets the printer configuration to the factory default values. Perform a
sensor calibration after this self test. (See
sensor calibration after this self test. (See
To perform a FEED and PAUSE self test, complete these steps:
1.
Turn off (O) the printer.
2.
Press and hold FEED + PAUSE
while turning on (I) the printer.
3.
Hold FEED + PAUSE until the first control panel light turns off.
The printer configuration is reset to the factory default values. No labels print at the end of
this test.
The printer configuration is reset to the factory default values. No labels print at the end of
this test.
CANCEL + PAUSE Self Test
Performing this self test resets the network configuration to the factory default values.
To perform a CANCEL and PAUSE self test, complete these steps:
1.
Turn off (O) the printer.
2.
Press and hold CANCEL + PAUSE
while turning on (I) the printer.
3.
Hold CANCEL + PAUSE until the first control panel light turns off.
The printer’s network configuration is reset to the factory default values. No labels print at
the end of this test.
The printer’s network configuration is reset to the factory default values. No labels print at
the end of this test.