Zebra Technologies ZT230 User Manual

Introduction
ZT230 Printer Control Panel Display

P1048261-004

8/22/12

SETTINGS Menu (continued)

Items in this menu are shown in the order in which they appear when you press the RIGHT
ARROW. For more information about these settings, see

Table 7, Print Settings on page 79

Set the Reprint Mode

When reprint mode is enabled, you can reprint the last label printed
either by issuing certain commands or by pressing the LEFT
ARROW on the control panel.

See

Reprint Mode on page 82

for more information.

Set the Maximum Label Length

Set the maximum label length to a value that is at least 1.0 in.
(25.4 mm) greater than the actual label length plus the interlabel
gap. If you set the value to one that is smaller than the label length,
the printer assumes that continuous media is loaded, and the printer
cannot calibrate.

See

Maximum Label Length on page 82

for more information.

Select the Display Language

If necessary, change the language that the printer displays. See

Language on page 92

for more information.

Note •

The selections for this parameter are displayed in

the actual languages to make it easier for you to find one
that you are able to read.

▼

REPRINT MODE

OFF

▲

▼

LABEL LENGTH MAX

▲

▼

LANGUAGE

ENGLISH

▲