Panasonic DX-800 User Manual

227

412

No data from the transmitting side.

Check with the other party.

--

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/417
418/419

Received data has too many errors.

Check with the other party.

--

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

--

422/427 Interface is incompatible.

Check with the other party.

--

430/434 Communication error occurred while receiving.

Check with the other party.

--

436/490 Received data has too many errors.

Check with the other party.

--

456

• Unit received a confidential document or was

requested to be polled of a confidential document
under any of following conditions:
1. Not enough space in memory to receive the

confidential document.

2. Confidential Mailbox is full.
3. While printing received document.

• Unit was requested to relay a document.

1. Print a File List and check the contents.
2. Wait until unit finishes printing.

492/493/ 

494

Communication error occurred while receiving.

Check with the other party.

--

495

Telephone line disconnected.

Check with the other party.

--

501/502 Communication error occurred using the internal V.34

Modem.

Check with the other party.

--

540/541/ 
542/543/

544

Communication error occurred while transmitting.

1. Reload the document and send again.
2. Check with the other party.

--

550

Telephone line disconnected.

Check with the other party.

--

552/553/

554/555

Communication error occurred while receiving.

Check with the other party.

--

580

Sub-address transmission to a unit that has no Sub-
address function.

Check the remote station.

581

Sub-address Password transmission to a unit that has
no Password Sub-address function.

Check the remote station.

601

ADF Door was opened during ADF transmission.

Close the ADF Door and send again.

623

No document loaded on the ADF.

Reload the document and send again.

--

630

Redial was not successful due to a busy line.

Reload the document and send again.

--

631

During dialing, STOP was pressed.

Reload the document and send again.

--

634

Redial was not successful due to no response from
the called station or wrong number dialed.

Note: If busy tone was not detected, the machine will

only redial once.

Check the telephone number and send again.

--

638

Power failure occurred during the communication.

Check the power cord and plug.

711

Incorrect LDAP settings.

Check the LDAP Server Name, LDAP Log in
Name, LDAP Password, LDAP Search Base.

712

Incorrect email address.

Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.

--

714

Cannot Log on to the LAN.

Check  the  10Base-T/100Base-TX  cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.

--

715

TCP/IP connection timed out.

Check the Internet Fax Parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.

--