Cisco Systems 4000 SERIES User Manual
Serial Cable Connection Guide
Document ID: 12219
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Overview
Prerequisites
Requirements
Components Used
Conventions
Overview
DTE or DCE?
Male or Female
Signaling
Ordering
Cisco 7000 Series Cables
Cisco AGS+ Cables
Cisco 4000 Series Cables
NP−2T Cables
NP−4T Cables
Cisco 3000 Series Cables
Cisco 2500 Series Cables
Cisco 500−CS Series Cables
Related Information
Male or Female
Signaling
Ordering
Cisco 7000 Series Cables
Cisco AGS+ Cables
Cisco 4000 Series Cables
NP−2T Cables
NP−4T Cables
Cisco 3000 Series Cables
Cisco 2500 Series Cables
Cisco 500−CS Series Cables
Related Information
Introduction
This document guides you through the process of selecting the right serial cables for your network.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information presented in this document was created from devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.
devices used in this document started with a cleared (default) configuration. If you are working in a live
network, ensure that you understand the potential impact of any command before using it.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.