DELL L400 User Manual

1.

Use a scribe to carefully pry the six rubber screw covers out of the six 
screw holes located along the top and bottom of the bezel on the front of 
the display assembly (see Figure 9).

2. Remove the six M2 x 3.5-mm screws located at the top and bottom of the 

bezel on the front of the display assembly (see Figure 9).

3. Separate the bezel from the display-assembly top cover.

The bezel is secured by slot openings that snap into the display-assembly 
top cover. Carefully lift the inside edge of the bezel, working your way 
around the inside perimeter, to unsnap and remove the bezel from the 
display assembly.

1.

Remove the display assembly bezel.

2. Lift the display assembly latch off of the display-assembly top cover       

(see Figure 10).

3. Slide the latch spring off of the post on the display-assembly top cover  

(see Figure 10).

You may need to use a small flat-blade screwdriver to separate the latch 
spring from the post.