RAD Data comm ASM-10/8 User Manual
09/10/00 16:26
Package Contents
2-1
Chapter 2
Installation and Setup
Installation and Setup
This chapter provides the following information for the ASM-10/8
standalone model:
standalone model:
•
Site requirements and prerequisites
•
Package contents
•
Instructions for mechanical installation
•
Instructions for electrical installation.
After installing the unit, refer to Chapter 3 to assure normal operation.
In case a problem encountered, refer to Chapter 4 for test and diagnostic
instructions.
In case a problem encountered, refer to Chapter 4 for test and diagnostic
instructions.
2.1 Site Requirements and Prerequisites
Power
ASM-10/8 should be installed within 1.5m (5 ft) of an easily accessible
grounded AC outlet. The outlet should furnish 100-115 VAC or 230 VAC.
grounded AC outlet. The outlet should furnish 100-115 VAC or 230 VAC.
•
Allow at least 90 cm (36 in) of clearance at the front for operating and
maintenance accessibility.
maintenance accessibility.
•
Allow at least 10 cm (4 in) clearance at the rear of the unit for signal lines
and interface cables.
and interface cables.
Ambient
Requirements
Requirements
The ambient operating temperature of ASM-10/8 is 0 to 50°C (32 to 122°F)
at relative humidity of 90%, non-condensing.
at relative humidity of 90%, non-condensing.
2.2 Package Contents
The ASM-10/8 includes the following items:
•
One ASM 10/8 unit (protected by adequate cushioning)
•
AC power cord
•
ASM 10/8 Installation and Operation Manual.