Barco 26-0503000-00 User Manual
40
MatrixPRO • 8x8 DVI Router • User’s Guide
4. Operation
Using the Main Menu
pí~íìë=jÉåì
From the Main Menu, select Status to display the Status Menu:
Figure 4-11. MatrixPRO Status Menu (sample)
This menu shows all current input-to-output assignments (or “routes”). Any input can be
routed to any combination of the 8 outputs. Please note:
routed to any combination of the 8 outputs. Please note:
•
When you first display the Status Menu, the lowest 6 of the 8 input/output
assignments are shown.
assignments are shown.
•
Use the ADJUST knob to scroll through the input/output display.
~
Turn the knob clockwise (CW) to scroll the display down the list of
assignments.
assignments.
~
Turn the knob counter-clockwise (CCW) to scroll the display up the list of
assignments.
assignments.
•
The display updates in real time whenever a new route is performed (when the
TAKE
button is pressed).
•
On the menu:
~
Numbers on the lower OUTPUT STATUS line are fixed, and do not
change. These numbers represent the 8 output channels.
change. These numbers represent the 8 output channels.
~
Numbers on the upper INPUT STATUS line show the input that is routed
to the output listed directly below.
to the output listed directly below.
~
The label “T” indicates that a Test Pattern is routed to the selected
output.
output.
~
The label “B” indicates that RGB Mute is enabled for the selected output.
~
The label “
-
” indicates that the selected output is blanked. This output is
inactive.
I N P U T S T A T U S
-
3
T
-
7
7
1
2
3
4
5
6
O U T P U T S T A T U S