Barco 26-0503000-00 User Manual
52
MatrixPRO • 8x8 DVI Router • User’s Guide
4. Operation
MatrixPRO Operating Procedures
råäçÅâáåÖ=íÜÉ=`çåíêçä=m~åÉä
The control panel can be locked in the following ways:
•
Via serial communications using the FPLock command. In Appendix B, refer to
the “
the “
” section on page 95 for details.
•
From the GUI, using the Front Panel Lockout check box on the Setup Tab. In
Chapter 5, refer to the “
Chapter 5, refer to the “
” section on page 75 for details.
When the panel is locked, the following message appears on the display:
Figure 4-18. MatrixPRO Lockout Message
The panel can be unlocked in the following ways:
•
Via serial communications using the FPLock command.
•
From the GUI, using the Front Panel Lockout check box on the Setup Tab.
•
From the front panel itself, using the following procedure.
Use the following steps to unlock the control panel (from the panel itself).
1. Press SEL + ESC + TAKE buttons simultaneously.
After a brief pause, front panel control is restored and the Main Menu is displayed.
F R O N T P A N E L L O C K O U T