Barco 26-0503000-00 User Manual

Using the Video Switching Tab

„

On the Video Switching Tab, use the following steps to perform a take:  

1.  In the Outputs Section, click the output to which you want to route an input.  The 

output button turns yellow.    

2.  In the Inputs Section, click the desired input source.  The selected input button 

turns yellow, and its number appears in a bright red box in the Video column — 
adjacent to the selected output.

3.  In the Inputs Section, click TAKE.  The selected input number appears in a bright 

green box in the Video column — indicating an active route.  

4.  Repeat from step 1 to perform another take.

Please note the following important points:

To cancel a route before pressing TAKE, click the Cancel button in the Inputs 
Section, or click the selected input button to “de-select” it.  The previous route 
remains in effect.

A “pending” route remains pending — even if you click a different output — until 
TAKE or Cancel is pressed.  The bright red square always indicates a pending 
route.

This procedure enables you to perform multiple input-to-output routes with one “take.”

„

On the Video Switching Tab, use the following steps to perform a multi-take:  

1.  In the Outputs Section, click the output to which you want to route an input.  The 

output button turns yellow.    

2.  In the Inputs Section, click the desired input source.  The selected input button 

turns yellow, and its number appears in a bright red box in the Video column — 
adjacent to the selected output.

3.  Repeat steps 1 and 2 for as many input-to-output routes as desired.

4.  In the Inputs Section, click TAKE.  The selected input numbers appear in bright 

green boxes in the Video column — indicating active routes.  

5.  Repeat from step 1 to perform another multi-take.

If an input is already associated with that output, the input 
number will appear within a bright green box in the Video 
column.  If there is no input associated with the output, the 
output is “blanked” and the label “--” is shown.

When the route is completed, the Status Menu (if visible) and 
the appropriate input/output buttons on the physical 
MatrixPRO panel update accordingly.