Barco 26-0503000-00 User Manual
MatrixPRO • 8x8 DVI Router • User’s Guide
97
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
MatrixPRO Remote Commands
kpq^q
•
Description: Number Ins/Outs Status
~
Send the number of inputs and outputs
mopq=åìã
•
Description: Saves current front panel configuration/routing to a Preset location
•
Parameters:
out
Preset number to save to; [1 - 8]
S
Example: PRST 1 (Saves configuration to preset location 1.)
mpq^q
•
Description: Displays preset information (e.g., preset valid, which input video/
audio # routed, audio level, etc.).
audio # routed, audio level, etc.).
•
Parameters:
out
Preset number; [1 - 8]
S
Examples:
PSTAT 1 (Displays preset status for preset 1)
PSTAT (Displays preset status for all presets):
•
Preset[1]; Out[1]: Active 1, Video 1, VRoute 1 RGBMute 0
•
Preset[1]; Out[2]: Active 1, Video 1, VRoute 1 RGBMute 0
•
etc.
obpbq
•
Description: Resets the system
•
Parameters: RESET [type] <confirm>
[type] specifies type of reset, F=Factory, S=Soft
[confirm] applicable only when reset type is F. Indicates whether
confirmation is desired; 0=No, 1=Yes (default)
confirmation is desired; 0=No, 1=Yes (default)
S
RESET F (Resets system to factory defaults and resets all presets.)
obs==
•
Description: MatrixPRO board revision and main software version information
Returns:
~
PCB Rev 1.0, Assembly Rev 1.0
~
MatrixPro DVI Software Version
~
Upper Board Fab: B, Assembly: 0
~
Lower Board Fab: B Assembly: 0
Note
This parameter is optional, if no parameter exist, all preset
information (1-8) will be displayed.
information (1-8) will be displayed.