Motorola 2247/57-62 User Manual
4
ENGLISH
1. Decide on a location for the Gateway.
Put the Gateway near a power source, a DSL wall outlet, and in a location where air can circulate
freely around it.
freely around it.
2. Power the Gateway.
Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the
power supply into an electrical outlet. Turn on the Power switch.
power supply into an electrical outlet. Turn on the Power switch.
The
Power
LED should light solid green.
3. Insert the Motorola Netopia
®
CD into your CDROM drive.
The Motorola Netopia
®
Installation Guide Wizard automates several tasks to get you up and
running easily. These tasks include making the cable connections, adding phones and configuring
the Gateway. Run the Wizard on every Windows-based PC that will connect to your network.
the Gateway. Run the Wizard on every Windows-based PC that will connect to your network.
The Installation Guide Wizard will start auto-
matically and the Welcome screen will appear
to step through the process.
matically and the Welcome screen will appear
to step through the process.
Follow the on-screen instructions to make all
of your connections.
of your connections.
Connections
2