3com 3C886 User Manual
42
C
HAPTER
4: S
ETTING
U
P
TCP/IP
FOR
W
INDOWS
AND
M
ACINTOSH
Figure 27 TCP/IP Dialog Box for Macintosh Computers
2 Select Ethernet from the Connect via drop down list box.
3 Most users should select Using DHCP Server from the Configure drop-down list
box, as most LANs utilize dynamic IP addressing. If this LAN uses static IP
addressing, select Manually and then enter the IP address.
addressing, select Manually and then enter the IP address.
TCP/IP Setup Using
Windows 3.11
Windows 3.11
If you are using Windows 3.11, a TCP/IP stack may not be provided as part of the
operating system. If you do not have a TCP/IP stack, you can use MS_TCP which is
provided on the 3Com Companion Programs CD-ROM.
operating system. If you do not have a TCP/IP stack, you can use MS_TCP which is
provided on the 3Com Companion Programs CD-ROM.
Setting up TCP/IP using
MS_TCP
To set up MS_TCP, do the following.
1 Install MS_TCP, located on the 3Com Companion Programs CD-ROM, onto your
hard drive.
2 From the Program manager, click Network.
Figure 28 Program Manager Group Box
3 From the Network group box, click Network Setup.