Multi-Tech Systems MT5600BA-V92 User Manual
Chapter 8 – Setting Country/Regional Codes
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273G)
51
Chapter 8 – Setting
Country/Regional Codes
The Default Country/Regional Code is B5.
If You Want to Change the Country/Regional Code
1.
View the List of Available Country/Regional Codes by executing the command AT+GCI=?<CR>
2.
Set and save the code by executing the command AT+GCI=nn<CR>
Note:
nn is the country/regional code. See the country/regional code list on the Multi-Tech Web site
3.
OK is displayed.
4.
The country code is then displayed (see the example below).
To Verify the Country Code
1.
Type AT+GCI?<CR>, or you can type ATI5<CR>
Example
1.
T
ype the command AT+GCI=B5<CR>
2.
Verify B5 was set by typing AT+GCI?<CR> or ATI5<CR>
3.
B5 indicates the configuration is set for any B5 country such as Canada or the United States, etc.
Countries/Regions Supported
See the list on the Multi-Tech Web site of countries and regions supported.
Go to:
Then click on
global modems
. The Global Modem Country/Region Approvals page displays. On this page you can
view approvals, configuration strings (which includes the country/regional code) and responses available in list form
by selecting the country/region and/or product.
by selecting the country/region and/or product.