Netgear DGN100Bv3 User Manual
Advanced Settings
117
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Note:
If you are not sure which protocol to select, select TCP/UDP.
9.
In the Starting Port field, enter the starting port number for the inbound connection.
10.
In the Ending Port field, enter the ending port number for the inbound connection.
If the inbound connection uses a single port number, enter that number in both fields.
11.
Click the Apply button.
The new service is added to the Port Triggering Portmap Table on the Port
Forwarding
Forwarding
/ Port Triggering screen.
To disable an existing port triggering service:
1.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering screen displays.
2.
Select the Port Triggering radio button.
3.
In the Port Triggering Portmap Table, clear the Enable check box for the service that you
want to disable.
want to disable.
4.
Click the Apply button.
Your settings are saved.
To change an existing port triggering service:
1.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering screen displays.
2.
Select the Port Triggering radio button.
3.
In the Port Triggering Portmap Table, select the radio button next to the service that you
want to change.
want to change.
4.
Click the Edit Service button.
The Port Triggering - Services screen displays.
5.
Change the settings for the service.
6.
Click the Apply button.
The changed settings of the service are shown in the Port Triggering Portmap Table on
the Port Forwarding
the Port Forwarding
/ Port Triggering screen.
To remove an existing port triggering service:
1.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding / Port Triggering screen displays.
2.
Select the Port Triggering radio button.
3.
In the Port Triggering Portmap Table, select the radio button to the left of the service that you
want to remove.
want to remove.
4.
Click the Delete Service button.