Netgear DGN100Bv3 User Manual
NETGEAR genie Basic Settings
31
N150 Wireless ADSL2+ Modem Router DGN1000Bv3
Configure Regular Internet Service
The modem router uses interface WAN1 for regular Internet service.
To configure the DLS setup for regular Internet service:
1.
Select BASIC > xDSL Setup.
The selection from the Physical WAN Type menu is fixed at ADSL2+.
2.
From the DSL Mode menu, select the DSL mode that your ISP provided you:
•
Auto. The modem router detects the DSL mode automatically. This is the default
setting.
•
ADSL (g.dmt).
•
ADSL2.
•
ADSL2+.
3.
Click the upper Apply button.
The DSL mode is saved.
4.
From the WAN menu, select WAN1.
WAN 1 is used for normal Internet service. This is the default selection.
5.
Leave the Enable This Interface check box selected.
This is the default selection for interface WAN1.
6.
From the Multiplexing Method menu, select LLC-based or VC-based, as indicated by your
ISP.
ISP.
7.
For the VPI, type a number between 0 and 255, as indicated by your ISP.
The default setting is 0.
8.
For the VCI, type a number between 32 and 65535, as indicated by your ISP.