Netgear DM111Pv2 User Manual

Connecting the Modem to the Internet

3

Solid Green

The ADSL port is synchronized with the DSLAM.

Blink (Green)

The ADSL port is in the process of synchronizing with the DSLAM.
Note: Per TR-068: Blink at 2 Hz with a 50% duty cycle when trying to 
detect carrier signal, blink at 4 Hz with a 50% duty cycle when the 
carrier has been detected and the modem is trying to train.

Off

No link is detected on the ADSL port or the modem is powered off.

Solid Green

IP is connected. The device has a WAN IP address from IPCP or 
DHCP and ADSL is up or a static IP address is configured, PPP 
negotiation —if used—has successfully completed, and no traffic 
detected.
If the IP or PPPoE session is dropped due to an idle time-out, the 
light will remain green if an ADSL connection is still present. If the 
session is dropped for any other reason, the light is turned off. The 
light will turn red when it attempts to reconnect and the DHCP or 
PPPoE fails (see below).

Off

Modem power off, modem in bridged mode, or ADSL connection not 
present.

Blink (Green)

IP is connected and IP traffic is passing through the device in either 
direction.

Red

Device attempted to become IP connected and failed (no DHCP 
response, no PPPoE response, PPPoE authentication failed, no IP 
address from IPCP, and so on.)
For bridged mode, the indicator light must be off.