Motorola 1.0.1 User Manual
MOTOMESH 1.0.1 Vehicle Mounted Modem Users Guide
2
When the IP address is known, open your web browser and enter the IP address of the VMM SBC.
For example, if the VMM SBC address is 10.128.32.1, then the web page would be found at
If you are running a VMM as a standalone device, the configuration web
page can be reached by connecting a PC to the wired interface. The
installation procedure described here requires administrator access.
Alternatively, all of the parameters that are provisioned via the web page
may also be provisioned via MeshManager.
page can be reached by connecting a PC to the wired interface. The
installation procedure described here requires administrator access.
Alternatively, all of the parameters that are provisioned via the web page
may also be provisioned via MeshManager.
Administrator and User Account Information
The device has two accounts for the web interface - an Administrative account (Super User), and a
User account (Normal User). The Administrative account must be used for provisioning the device,
and the User account may be used for monitoring the status of the device.
User account (Normal User). The Administrative account must be used for provisioning the device,
and the User account may be used for monitoring the status of the device.
The password for the admin account should be changed during installation. The password for the User
account can be changed by an administrator or the user.
account can be changed by an administrator or the user.
Table 3-1
Login Screen Default User Names and Passwords
Type of User
Username
Password (Default)
Administrator (Super User)
admin admin
User (Normal User)
monitor monitor
Figure 3-5
MOTOMESH Sample Web Interface Login Screen
6881011Y54-A
3-5
September 2005