Motorola 1.0.1 User Manual

Page of 58
MOTOMESH 1.0.1 Vehicle Mounted Modem Users Guide 
6881011Y54-A  
 
3-9 
 September 2005
Device Settings Section 
Table 3-2 
Device Settings Section (Configuration Tab) 
Field Name 
Field Description 
Field Default Value 
System Name 
This is the name of the device as shown by 
MeshManager 
Assigned by 
Network Administrator 
RDATE Server IP 
Address 
The IP address of the RDATE server. This is usually the 
MiSC when operating in infrastructure mode. The 
RDATE server provides the current date to the VMM. 
The VMM can operate without an RDATE server. 
172.31.0.20 
 
Bridge Addressing Section 
Table 3-3 
Bridge Addressing Section (Configuration Tab) 
Field Name 
Field Description 
Field Default Value 
Network DHCP 
Or  
Statically Provisioned 
Use this setting to decide whether the device will get its 
IP address automatically from a Network DHCP server 
or use a fixed address provided manually by a Network 
Operator (Statically provisioned). 
Network DHCP 
IP Address 
The IP address will be automatically provided by a 
DHCP server if one exists and the above field has been 
set to Network DHCP. If the setting has been set as 
Statically Provisioned, and not provided by the Network 
Operator, then it will be automatically hashed from the 
device’s MAC Address. 
Varies depending on the 
selection made in the 
field above. 
 
Subnet Mask 
This is the subnet mask for the local Ethernet segment. 
blank 
Default Gateway 
The VMM will tell the attached Ethernet devices to use 
this address for the default gateway, and the VMM will 
use the address when accessing the local Ethernet 
segment. 
Assigned by 
Network Administrator 
DNS Server Address 
The address of the local DNS Server. 
Assigned by 
Network Administrator 
DNS Search Suffix 
The DNS search suffix provided by the Network 
Administrator. 
blank 
 
Additional Information about the Network DHCP Setting 
Network DHCP means that the VMM device can be configured to request an address from a DHCP 
server and requires the inclusion of a DHCP server in the core network configuration to answer these 
requests.  With Network DHCP selected, the VMM will send DHCP requests for its own address to the 
core network once it becomes associated and establishes communications with the infrastructure.