Motorola 1.0.1 User Manual
Chapter 3: Device Configuration
6881011Y54-A
3-12
September 2005
Field Name
Field Description
Field Default
Value
the node set to Force Unauthorized.
Local:
In Local mode, the User ID and password for all devices requesting peer-
to-peer access must be validated against the Group security information
configured in the VMM. If the password is not valid, access will be denied.
If the password is valid, the device will be authorized for peer-to-peer
access and a secure connection will be maintained for the duration of the
association with the Peer communication. Integrity checking will be carried
out on all the packets flowing between the source and destination node.
to-peer access must be validated against the Group security information
configured in the VMM. If the password is not valid, access will be denied.
If the password is valid, the device will be authorized for peer-to-peer
access and a secure connection will be maintained for the duration of the
association with the Peer communication. Integrity checking will be carried
out on all the packets flowing between the source and destination node.
Local ID
The specified Local ID is used for communication authentication with an
Intelligent Access Point device (IAP).
Intelligent Access Point device (IAP).
LOCAL
Local
Password
Password
The password used for authentication control between a local subscriber
device and an IAP device.
device and an IAP device.
1234
Group ID
The specified Group ID is used for authentication control between local
subscriber devices when communicating in peer-to-peer mode.
subscriber devices when communicating in peer-to-peer mode.
GROUP
Group
Password
Password
The password used between local subscriber devices that belong to the
same assigned group and share the same password.
same assigned group and share the same password.
1234
Geo Settings Section
Table 3-6
Device Web Interface - Geo Settings Section (Configuration Tab)
Field Name
Field Description
Field Default Value
Enable Geo Position
Selecting this checkbox enables the reporting of the
device’s physical location in Geo coordinates.
device’s physical location in Geo coordinates.
Checkbox Disabled
Reporting Interval
This value represents how often the devices position is
relayed to the Primary and secondary (if IP address
provided) MAP server.
relayed to the Primary and secondary (if IP address
provided) MAP server.
0
Primary MAP server
The IP address of the Primary (main) MAP Server where
the Geo location coordinates are to be sent. The address
may be provided by a Network Administrator or user
running the MOTOMESH MeshView application.
the Geo location coordinates are to be sent. The address
may be provided by a Network Administrator or user
running the MOTOMESH MeshView application.
0
Secondary MAP
server
server
The IP address of the Secondary (additional) MAP Server
or workstation where the Geo location coordinates are to
be sent. The address may be provided by a Network
Administrator or user running the MOTOMESH
MeshView application.
or workstation where the Geo location coordinates are to
be sent. The address may be provided by a Network
Administrator or user running the MOTOMESH
MeshView application.
0