Pinnacle PCTV SAT CI PCI DVB-S DE EN NL Ret +rem 202261451 User Manual
Product codes
202261451
82
PCTV Sat (CI)
S
TARTING
S
AT
F
INDER
After the system requirements described above have been fulfilled, start the
SatFinder from the Pinnacle program group .../Tools/SatFinder.
SatFinder from the Pinnacle program group .../Tools/SatFinder.
T
HE
S
AT
F
INDER IN DETAIL
Under Satellite first choose the satellite on which you want to take a bearing
and with which your satellite dish is already roughly aligned.
and with which your satellite dish is already roughly aligned.
In order to simplify the fine adjustment which now follows, an example
frequency has already been set up for each satellite so that after starting
SatFinder, you should receive a signal immediately.
frequency has already been set up for each satellite so that after starting
SatFinder, you should receive a signal immediately.
The level of the signal currently being received for the selected satellite is
displayed.
displayed.
Status window
Here you will receive short messages as to the status of the current settings
and also error messages.
and also error messages.
Traffic lights
The traffic lights in the top right of the SatFinder widow show roughly the
quality of the signal currently being received.
quality of the signal currently being received.
red = no data are being received
yellow = data are being received but the signal is weak and possibly
prone
to
interference
green = data are being received and the likelihood of the signal being
prone
to
interference
is
low.