Netgear FVS318N User Manual

Click Apply to save your settings. VPN tunnel clients are now able to connect to the wireless 
VPN firewall and receive a virtual IP address in the client address range.

Add Routes for VPN Tunnel Clients

The VPN tunnel clients assume that the following networks are located across the 
VPN-over-SSL tunnel:

The subnet that contains the client IP address (that is, PPP interface), as determined by 
the class of the address (Class A, B, or C).

Subnets that are specified in the Configured Client Routes table on the SSL VPN Client 
screen.

If the assigned client IP address range is in a different subnet from the local network, or if the 
local network has multiple subnets, or if you select split-tunnel operation, you need to define 
client routes.



Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen for IPv4 
displays (see 

Specify the IP version for which you want to add a route:

IPv4. In the upper right of the screen, the IPv4 radio button is already selected by 
default. Go to 

IPv6. Select the IPv6 radio button. The SSL VPN Client screen displays the IPv6 
settings (see 

Secondary DNS Server

The IP address of the secondary DNS server that is assigned to the VPN 
tunnel clients. This setting is optional.

IPv4 screen only

Client Address 
Range Begin

The first IP address of the IPv4 address range that you 
want to assign to the VPN tunnel clients. By default, the 
first IPv4 address is 192.168.251.1.

Client Address 
Range End

The last IP address of the IPv4 address range that you 
want to assign to the VPN tunnel clients. By default, the 
last IPv4 address is 192.168.251.254.

IPv6 screen only

Client IPv6 
Address Range 
Begin

The first IP address of the IPv6 address range that you 
want to assign to the VPN tunnel clients. By default, the 
first IPv6 address is 4000::1.

Client IPv6 
Address Range 
End

The last IP address of the IPv6 address range that you 
want to assign to the VPN tunnel clients. By default, the 
last IPv6 address is 4000::200.