Netgear FVS318N User Manual
LAN Configuration
64
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To edit a VLAN profile:
1.
On the LAN Setup screen for IPv4 (see
on page 59), click the Edit button in
the Action column for the VLAN profile that you want to modify. The Edit VLAN Profile
screen displays. This screen is identical to the Add VLAN Profile screen (see the
previous figure).
screen displays. This screen is identical to the Add VLAN Profile screen (see the
previous figure).
2.
Modify the settings as explained in the previous table.
3.
Click Apply to save your settings.
To enable, disable, or delete one or more VLAN profiles:
1.
On the LAN Setup screen for IPv4 (see
on page 59), select the check box to
the left of each VLAN profile that you want to enable, disable, or delete, or click the
Select All table button to select all profiles. (You cannot select the default VLAN profile.)
Select All table button to select all profiles. (You cannot select the default VLAN profile.)
2.
Click one of the following table buttons:
•
Enable. Enables the VLAN or VLANs. The ! status icon changes from a gray circle to
a green circle, indicating that the selected VLAN or VLANs are enabled. (By default,
when a VLAN is added to the table, it is automatically enabled.)
a green circle, indicating that the selected VLAN or VLANs are enabled. (By default,
when a VLAN is added to the table, it is automatically enabled.)
•
Disable. Disables the VLAN or VLANs. The ! status icon changes from a green circle
to a gray circle, indicating that the selected VLAN or VLANs are disabled.
to a gray circle, indicating that the selected VLAN or VLANs are disabled.
•
Delete. Deletes the VLAN or VLANs.
Configure VLAN MAC Addresses and LAN Advanced Settings
By default, all configured VLAN profiles share the same single MAC address as the LAN
ports. (All LAN ports share the same MAC address.) However, you can change the VLAN
MAC settings to allow up to 16 VLANs to each be assigned a unique MAC address.
ports. (All LAN ports share the same MAC address.) However, you can change the VLAN
MAC settings to allow up to 16 VLANs to each be assigned a unique MAC address.
You can also enable or disable the broadcast of Address Resolution Protocol (ARP) packets
for the default VLAN. If the broadcast of ARP packets is enabled, IP addresses can be
mapped to physical addresses (that is, MAC addresses).
for the default VLAN. If the broadcast of ARP packets is enabled, IP addresses can be
mapped to physical addresses (that is, MAC addresses).
To configure a VLAN to have a unique MAC address:
1.
Select Network Configuration > LAN Setup. In the upper right of the screen, the IPv4
radio button is selected by default. The LAN submenu tabs display, with the LAN Setup
screen in view, displaying the IPv4 settings (see
radio button is selected by default. The LAN submenu tabs display, with the LAN Setup
screen in view, displaying the IPv4 settings (see
2.
Click the Advanced option arrow in the upper middle of the LAN Setup screen. The IPv4
LAN Advanced screen displays:
LAN Advanced screen displays: