ZyXEL Communications ADSL2+4 User Manual
P-660H-T1v3s User’s Guide
131
C
H A P T E R
11
Static Route
11.1 Overview
The P-660H-T1v3s usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the P-660H-T1v3s send data to
devices not reachable through the default gateway, use static routes.
computers on the LAN to the Internet. To have the P-660H-T1v3s send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660H-
T1v3s’s LAN interface. The P-660H-T1v3s routes most traffic from A to the
Internet through the P-660H-T1v3s’s default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
T1v3s’s LAN interface. The P-660H-T1v3s routes most traffic from A to the
Internet through the P-660H-T1v3s’s default gateway (R1). You create one static
route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3
connected to the LAN.
Figure 50 Example of Static Routing Topology
11.1.1 What You Can Do in the Static Route Screens
Use the Static Route screens (
) to view and configure
IP static routes on the P-660H-T1v3s.
WAN
R1
R2
A
R3
LAN