ZyXEL Communications ADSL2+4 User Manual

 Chapter 13 Quality of Service (QoS)

P-660H-T1v3s User’s Guide

Use this screen to display a summary of rules and actions configured for the P-
660H-T1v3s. In the Advanced > QoS screen, click the QoS Settings Summary 
button to open the following screen.

Figure 59   Advanced Setup > QoS > QoS Settings Summary

802.1p

Select a priority level (0 to 7) from the drop-down list box.

Action
IPP/DS Field

Select IPP/TOS to specify an IP precedence range and type of services.

Select DSCP to specify a DiffServ Code Point (DSCP) range.

IP Precedence 
Remarking

Enter a range from 0 to 7 to re-assign IP precedence to matched traffic. 
Zero is the lowest priority and seven is the highest.

Type of 
Service 
Remarking

Select a type of service to re-assign the priority level to matched traffic.

Available options are: Normal service, Minimize delay, Maximize 
throughput, Maximize reliability and Minimize monetary cost.

DSCP 
Remarking

Specify a DSCP number between 0 and 63 to re-assign the priority level 
to matched traffic.

802.1p 
Remarking

Select a priority level (0 to 7) to re-assign the priority level to matched 
traffic.

Queue #

Specify a Low, Medium, High or Highest queue tag to matched traffic. 
Traffic assigned to a higher queue gets through faster while traffic in 
lower queues is dropped when there is network congestion.

ADD

Click this to add the rule.

DELETE

Click this to remove the rule.

CANCEL

Click this to restore previously saved settings.

Table 39   Advanced > QoS