ZyXEL Communications 2602HWNLI-D7A User Manual
Prestige 2602HWNLI-D7A Support Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
173
Trunking: SIP to FXO
User X uses phone 1 (SIP number: 33333) to make a call to the ZyXEL Device A via VoIP. A forwards the call
to User Y PSTN phone (103).
to User Y PSTN phone (103).
Application Scenario:
Device A is P2602HWNLI-D1A, WAN IP: 172.25.24.131, SIP 2 number: 22222.
Device B is P2602HWNLI-D1A, SIP1 number: 33333.
Phone 1 number: 33333, it is an analog phone, which connects to P2602HWNLI-D1A phone 1 port.
Phone 1 number: 33333, it is an analog phone, which connects to P2602HWNLI-D1A phone 1 port.
Phone 2 number: 22222.
Phone 3 number: 103, it is a PTSN phone.
Phone 3 number: 103, it is a PTSN phone.
In this graph, User X uses Phone 1(33333) dials SIP phone 2 (22222), and hears “alert tone”, then dial user
Y PSTN phone number 103 and input the password 123456, phone 3 will ring.
Y PSTN phone number 103 and input the password 123456, phone 3 will ring.
Configuration details
On Device A:
Step 1: Choose “Activate Trunking”on P2602HWNLI-D1A web GUI: VoIP > Trunking > General.
Step 2: Set Auto Attendant Timeout 10 sec, Dialing Interval 3 sec on P2602HWNLI-D1A web GUI: VoIP >
Trunking > General.
Step 3: Choose Active Auto Attendant Authentication and set password 123456 on P2602HWNLI-D1A web
Step 3: Choose Active Auto Attendant Authentication and set password 123456 on P2602HWNLI-D1A web
GUI: VoIP > Trunking > General, then click “Apply” button.