ZyXEL Communications 2602HWNLI-D7A User Manual

Page of 246
 
Prestige 2602HWNLI-D7A Support Notes 
 
 
 
All contents copyright (c) 2007 ZyXEL Communications Corporation.   
191 
(e.g., www.zyxel.com.tw) for your server (e.g., Web server) from a DDNS server. The outside users can always 
access the web server using the www.zyxel.com.tw regardless of the WAN IP of the 312.   
When the ISP assigns the Prestige a new IP, the Prestige updates this IP to DDNS server so that the server can 
update its IP-to-DNS entry. Once the IP-to-DNS table in the DDNS server is updated, the DNS name for your 
web server (i.e., www.zyxel.com.tw) is still usable.   
When do I need DDNS service? 
When  you  want  your  internal  server  to  be  accessed  by  using  DNS  name  rather  than  using  the  dynamic  IP 
address  we  can  use  the  DDNS  service.  The  DDNS  server  allows  to  alias  a  dynamic  IP  address  to  a  static 
hostname.  Whenever  the  ISP  assigns  you  a  new  IP,  the  Prestige  sends  this  IP  to  the  DDNS  server  for  its 
updates. 
What DDNS servers does the Prestige support? 
The DDNS servers the Prestige supports currently is 
 where you apply the DNS from 
and update the WAN IP to.   
What is DDNS wildcard?   
Some  DDNS  servers  support  the  wildcard  feature  which  allows  the  hostname,  *.yourhost.dyndns.org,  to  be 
aliased to the same IP address as yourhost.dyndns.org. This feature is useful when there are multiple servers 
inside  and  you  want  users  to  be  able  to  use  things  such  as  www.yourhost.dyndns.org  and  still  reach  your 
hostname.   
Does the Prestige support DDNS wildcard? 
Yes,  the  Prestige  supports  DDNS  wildcard  that 
  supports.  When  using  wildcard,  you 
simply enter yourhost.dyndns.org in the Host field in Menu 1.1. 
Can the Prestige SUA handle IPsec packets sent by the VPN gateway behind Prestige? 
Yes, the Prestige's SUA can handle IPsec ESP Tunneling mode. We know when packets go through SUA, SUA 
will change the source IP address and source port for the host. To pass IPsec packets, SUA must understand the 
ESP packet with protocol number 50, replace the source IP address of the IPsec gateway to the router's WAN IP 
address.  However,  SUA  should  not  change  the  source  port  of  the  UDP  packets  which  are  used  for  key 
managements.  Because  the  remote  gateway  checks  this  source  port  during  connections,  the  port  thus  is  not 
allowed to be changed.