ZyXEL Communications 2602HWNLI-D7A User Manual

Prestige 2602HWNLI-D7A Support Notes

not knowing what your MAC address is, please enter a command "ipconfig /all" after DOS prompt to get the
MAC (physical) address of your wireless client.

If you use SMT management, the MAC Address Filter configuration are as shown below.

Enter the MAC Addresses of wireless cards in the filter set to allow or deny association from these cards.

Menu 3.5.1 - WLAN MAC Address Filter

Active= Yes

Filter Action= Allowed Association

------------------------------------------------------------------------------

1= 11:11:11:11:11:11 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00

2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00

3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00

4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00

5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00

6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00

7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00

8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00

9= 00:00:00:00:00:00 21= 00:00:00:00:00:00

10= 00:00:00:00:00:00 22= 00:00:00:00:00:00

11= 00:00:00:00:00:00 23= 00:00:00:00:00:00

12= 00:00:00:00:00:00 24= 00:00:00:00:00:00

------------------------------------------------------------------------------

Enter here to CONFIRM or ESC to CANCEL:

Key Settings:

Option

Descriptions

Filter Action

Allow or block association from MAC addresses contained in this list. If Allow Association
is selected in this field, hosts with MAC addresses configured in this list will be allowed to

associate with AP. If Deny Association is selected in this field, hosts with MAC addresses

configured in this list will be blocked.