ZyXEL Communications 623ME-T User Manual

Prestige 623ME-T User’s Guide 

14-8  

Remote 

Node 

Configuration 

Version  Press [SPACE BAR] and then [ENTER] to select the RIP version.  Options 

are RIP-1, RIP-2B or RIP-2M. 

RIP-1  

Multicast 

IGMP-v1 sets IGMP to version 1, IGMP-v2 sets IGMP to version 2 and 
None disables IGMP. 

None 

IP Policies 

You can apply up to four IP Policy sets (from 12) by typing in their numbers 
separated by commas. Configure the filter sets in menu 25 first (see the IP 
Policy Routing chapter) and then apply them here. 

3, 4, 5, 6 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to 
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen. 

The following figure uses sample IP addresses to help you understand the field of My WAN Addr in menu 
11.3. Refer to the previous LAN and WAN IP Addresses figure in the web configurator chapter on LAN 
setup for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP 
(172.16.0.1 in the following figure) while Rem IP Addr indicates the peer WAN IP (172.16.0.2 in the 
following figure).