ZyXEL Communications 623ME-T User Manual
Prestige 623ME-T User’s Guide
20-6
System Information and Diagnosis
Step 3. Enter 1 from Menu 24.3 — System Maintenance — Log and Trace to display the error log in
the system.
After the Prestige finishes displaying the error log, you will have the option to clear it. Samples of typical
error and information messages are presented in the next figure.
error and information messages are presented in the next figure.
Figure 20-7 Sample Error and Information Messages
20.4.2 Syslog and Accounting
The Prestige uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to a
syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System Maintenance — UNIX
Syslog, as shown next.
syslog server. Syslog and accounting can be configured in Menu 24.3.2 — System Maintenance — UNIX
Syslog, as shown next.
Figure 20-8 Menu 24.3.2 System Maintenance : UNIX Syslog
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
choose what you want to log.
Table 20-3 Menu 24.3.2 System Maintenance : UNIX Syslog
PARAMETER DESCRIPTION
UNIX Syslog:
Active Use [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address Type the IP address of your syslog server.
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX
Syslog:
Active= No
Syslog IP Address= 0.0.0.0
Log Facility= Local 1
Log Facility= Local 1
Types:
CDR= No
Packet Triggered= No
Filter Log= No
PPP Log= No
PPP Log= No
Press ENTER to Confirm or ESC to Cancel:
59 Thu Jan 01 00:00:03 1970 PP0f INFO LAN promiscuous mode <0>
60 Thu Jan 01 00:00:03 1970 PP00 -WARN SNMP TRAP 0: cold start
61 Thu Jan 01 00:00:03 1970 PP00 INFO main: init completed
62 Thu Jan 01 00:00:19 1970 PP00 INFO SMT Session Begin
63 Thu Jan 01 00:00:24 1970 PP0a WARN MPOA Link Down
Clear Error Log (y/n):
Clear Error Log (y/n):