ZyXEL Communications 623ME-T User Manual
Prestige 623ME-T User’s Guide
System Maintenance
22-1
Chapter 22
System Maintenance
This chapter leads you through SMT menus 24.8 to 24.10.
22.1 Command Interpreter Mode Overview
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu
when finished.
functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from
the SMT by selecting menu 24.8. See the included disk or the zyxel.com web site for more detailed
information on CI commands. Enter 8 from Menu 24 — System Maintenance. A list of valid commands
can be found by typing help or ? at the command prompt. Type “exit” to return to the SMT main menu
when finished.
Figure 22-1 Command Mode in Menu 24
Figure 22-2 Valid Commands
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:
Copyright (c) 1994 - 2003 ZyXEL Communications Corp.
p623me-t1> ?
Valid commands are:
sys exit ether wan
etherdbg usb ip bridge
etherdbg usb ip bridge
p623me-t1>