ZyXEL Communications 623ME-T User Manual
Prestige 623ME-T User’s Guide
Introducing the SMT
10-1
Chapter 10
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and gives an
overview of its menus.
10.1 SMT Introduction
The Prestige’s SMT (System Management Terminal) is a menu-driven interface that you can access from a
terminal emulator through the console port or over a telnet connection.
terminal emulator through the console port or over a telnet connection.
10.1.1 Procedure for SMT Configuration via Telnet
The following procedure details how to telnet into your Prestige.
Step 1. In Windows, click Start (usually in the bottom left corner), Run and then type “telnet
Step 1. In Windows, click Start (usually in the bottom left corner), Run and then type “telnet
192.168.1.1” (the default IP address) and click OK.
Step 2. For your first login, enter the default password “1234”. As you type the password, the screen
displays an asterisk “*” for each character you type.
Figure 10-1 Login Screen
Step 3.
After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period) after you log in,
your Prestige will automatically log you out. You will then have to telnet into the Prestige again.
your Prestige will automatically log you out. You will then have to telnet into the Prestige again.
10.1.2 Prestige SMT Menu Overview
The following figure gives you an overview of the various SMT menu screens of your Prestige.
Password : xxxx