Black Box 34336 User Manual

5.Programming a response to a correct password.  Enter the following

command, replacing CONNECTED with your message:

The DTE responds with the specified message when the modem receives
a correct password.

Certain modems can be used to remotely control other modems. Alternately,
modems may be remotely controlled from a computer or other DTE. This
section explains modem-controlled remote control. Remote control from a
DTE is explained in Section 4.9.

Two types of modem-controlled remote control are possible:

• Direct modem-to-modem control—One modem can be used to control

the front panel of another modem through a phone link.

• Control through a rack controller—A modem in a rack enclosure equipped

with an intelligent rack controller can control:

Another modem in the same rack or

A remote modem connected to any modem in the rack.

For both types of remote control, the controlling modem and the controlled
(remote) modem must be connected at a data rate that uses trellis coding.
(This does not apply, however, if both modems are installed in the same rack
and the rack is equipped with a rack controller.)

REMOTE screen 1 on the LCD allows you to use one Modem 34336 to
control the front panel of another Modem 34336 via a phone link. (REMOTE
screen 2 is discussed in Section 4.8.2.)