Black Box MD1640A User Manual

106

SERIES II INTELLIGENT DATA/FAX MODEMS

Table 7-1. Modem LOGIN, Setup and Remote Escape Code
Procedures

To change your modem’s LOGIN Password and Setup Password:

Step

Procedure

Note:

Passwords are upper/lower case sensitive. The case you enter

here is the case that must be used at Log-In.

Type

AT#IBLACK BOX

and hit RETURN. Your modem will

respond with:

OK (if the LOGIN Password is wrong, the modem’s response is
ERROR)

2. Type

AT#SMODEMSETUP

and hit RETURN. Your modem will re-

spond with the following:

OK (or ERROR if wrong Setup Password)

Note:

At this point you can change the LOGIN Password and

Setup Password.

3. Type

AT#I=xxxxxxxxxx

(with any keyboard characters used,

minimum 6 maximum 10) and hit RETURN. Your modem
responds with:

4. Type

AT#S=yyyyyyyyyy

(with keyboard characters used,

minimum 6 maximum 10) and hit RETURN. Your modem
responds with:

To change your Remote Configuration feature status:

If you want Remote Configuration off, set S-Register S13 to 0
(zero). Refer to Chapter 6 for details on how to set S-Register
values.

If you want Remote Configuration on and wish to change the
Remote Escape Character, change the S-Register S13 value. If you
leave it at the default value, decimal 37 (% sign) will be your
modem’s remote escape character.