D-Link AV 500 User Manual

This section will allow you to change the local network settings of the DHP-W310AV and to configure the DHCP settings.

Enter the Device Name of this DHP-W310AV. 

You will use this name to connect to it 

through a web browser. The default name 

is listed on your Wi-Fi Configuration Card.

Use the drop-down menu to select Dynamic 

IP  (DHCP)  to  automatically  obtain  an  IP 

address on the LAN/private network. For 

Static IP setup, see the next page.

Your  Internet  Service  Provider  (ISP)  may 

require  this  to  be  set  a  certain  way  for 

Internet access. Contact your ISP regarding 

such requirements.

This shows the current IPv6 address of the 

DHP-W310AV on your network.

Click Save Settings to save and activate the

new changes.