Aztech Systems DSL600E(C) Leaflet
ETHERNET PORT
ETHERNET
CABLE
COMPUTER
ADSL MODEM
Connect one end of the Ethernet cable to the Ethernet port of t he computer and the
other end to the ETHERNET Port of the DSL Modem.
other end to the ETHERNET Port of the DSL Modem.
1c
Note:
The picture illustrates the connection t o a single telephone or fax machine. If you have another telephone
or fax machine connected to other telephone wall socket (sharing the same line), please attach another
The picture illustrates the connection t o a single telephone or fax machine. If you have another telephone
or fax machine connected to other telephone wall socket (sharing the same line), please attach another
POTS Splitter to telephone wall socket to prevent DSL signal from getting disconnected while surfing.
TELEPHONE
TELEPHONE
LINE
(OPTIONAL)
WALL SOCKET
CONNECT TO WALL SOCKET
DSL MODEM
POTS
SPLITTER
DSL JACK
Connect one end of the telephone line to the modem labeled ADSL and the other end to the
pots splitter labeled MODEM (optional) to connect a physical telephone, use another telephone
line connect from the telephone to the pots splitter labeled PHONE.
pots splitter labeled MODEM (optional) to connect a physical telephone, use another telephone
line connect from the telephone to the pots splitter labeled PHONE.
1b
DSL MODEM
POWER SWITCH
DC 9V JACK
Power Adapter
Power Cable
Step
1
:
Hardware Setup
Connect the power adapter to the power socket and the other end to the DC 9V jack of the DSL
Router. Switch on both POWER adapter and the DSL MODEM.
Router. Switch on both POWER adapter and the DSL MODEM.
1
a
QUICK INSTALLATION GUIDE
Version 1.0
Aztech DSL600E(C)
Ethernet Modem
Package Contents
1. 1 x DSL600E(C) Ethernet Modem
2. Quick Installation Guide
3. User Manual (Found in CD)
4. Utility CD
5. 1 x RJ-45 Straight Cable
6. 1 x Telephone Cable ( RJ-11)
7. 1x Power Adaptor (9V)
8. 2 x POTS Splitter
2. Quick Installation Guide
3. User Manual (Found in CD)
4. Utility CD
5. 1 x RJ-45 Straight Cable
6. 1 x Telephone Cable ( RJ-11)
7. 1x Power Adaptor (9V)
8. 2 x POTS Splitter
Minimum System Requirements
- Windows 98SE/ ME/ 2000/ XP
- MAC 9.x to 10.x
- 64 MB RAM for Win 98 SE/ ME
- 128 MB RAM for Win XP/ 2000
- 64 MB or 128 MB RAM for Mac
- 4 x CDROM Drive
- Ethernet Port (LAN Card)
- MAC 9.x to 10.x
- 64 MB RAM for Win 98 SE/ ME
- 128 MB RAM for Win XP/ 2000
- 64 MB or 128 MB RAM for Mac
- 4 x CDROM Drive
- Ethernet Port (LAN Card)
For Technical Support
Please contact
Aztech Systems Ltd
support@aztech.com
Tel: 6749-2062
Support Hotline Hours
Mon-Fri, 9am to 6pm
(Except public holidays)
Important
Before you run the utility CD, please make sure that PC’s Network Card TCP/IP
Properties and the Internet browser proxy is set accordingly. It is also assumed that the
computer/ notebook has the network card already installed.
(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows the
Properties and the Internet browser proxy is set accordingly. It is also assumed that the
computer/ notebook has the network card already installed.
(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows the
user who has a Static IP Address on the network card to access either the DSL Modem configuration
page or surf web)
FOR WINDOWS USERS:
2. Settings for Internet Browser Proxy:
i) Windows Desktop-> right click on Internet Explorer (IE) icon, scroll
down to select Properties
ii) “Internet Properties” window -> click Connections tab -> Select
Never dial a connection -> click LAN Settings …
iii) “Local Area Network (LAN) Settings “window ->remove the tick for
the option for the Automatic configuration -> remove the tick for the
option box for Proxy Server -> click OK -> click again to exit from
option box for Proxy Server -> click OK -> click again to exit from
“Internet Properties” window
3. For Singnet Filtering Service User (e.g. Family On-line)
i) Windows Desktop -> right click Internet Explorer (IE) -> click
Properties
ii) “Internet Properties” window -> click Connections tab Select Never
dial a connection -> click LAN Settings kkdk
iii) Click to put a tick for Automatically detect settings
iv) Click to put a tick for “Use a proxy server for your LAN ...”
-Type filter.singnet.com.sg in “Address” field ->
Type 8080 in “Port” -> click Advanced
-Proxy Settings window - > click to put a tick for “Use the
Same Proxy Server for all protocols”
Type 8080 in “Port” -> click Advanced
-Proxy Settings window - > click to put a tick for “Use the
Same Proxy Server for all protocols”
-Type 192.168.1.1 in the space provided under
“Exceptions”. Click OK to exit “Proxy Setting” -> click OK
to exit “LAN Settings” -> click OK again to exit “Internet Properties”
“Exceptions”. Click OK to exit “Proxy Setting” -> click OK
to exit “LAN Settings” -> click OK again to exit “Internet Properties”
1a. Configure TCP/IP settings for Win 98SE/Me
i) Windows Desktop -> right click Network Neighborhood
for Win98SE / Network Places for Win ME -> Properties
ii) “Network” window -> click the Configuration tab -> scroll down to
select and double click TCP/IP xxx (xxx refers refers to the model
of the Ethernet Network Card connected to the DSL600E(C))
of the Ethernet Network Card connected to the DSL600E(C))
iii) “TCP/IP Properties” window -> select IP Address tab ->Select
Obtain an IP address automatically -> click DNS Configuration
tab -> click Disable DNS -> Click OK
tab -> click Disable DNS -> Click OK
1b. Configure TCP/IP settings for Windows 2K/XP
i) Windows Desktop-> right click on Network Place icon, scroll down
to select Properties
ii) “Network & Dial-Up Connection” window -> click Local
Area Connection -> scroll down to select and double click
Internet Protocol TCP/IP
Internet Protocol TCP/IP
iii) “Internet Protocol (TCP/IP) Properties” ->select Obtain an
IP address automatically -> select Obtain DNS server
address automatically -> click OK
IP address automatically -> select Obtain DNS server
address automatically -> click OK
FOR WINDOWS 98SE/ME/XP/2000 USERS
2a
IMPORTANT:
Insert the Utility CD into the CD-ROM. The utility
will auto-run and display the main menu. Select Setup Wizard
button to proceed.
(Note: If doesn’t auto-run, then go to the CD-ROM
drive and execute the Setup.exe)
FIREWALL REMINDERS:
If your computer is installed with a firewall, it might prompt that
the setup launcher is trying to access the internet, just click on
Allow or Grant Access to proceed with setup. If the firewall
does not give you the prompt and utility informed you that your
computer is with a firewall, exit the utility and try disabling the
firewall rerun the utility CD. Enable the firewall after completing
the setup.
Setup Wizard will start to check and configure
the PC and DSL Router. In event the Wizard
prompts error, please follow the guide to rectify
the problem.
the PC and DSL Router. In event the Wizard
prompts error, please follow the guide to rectify
the problem.
2b
After checking, it will prompt you to enter
Username and Password to setup the Internet
Connection.
Username and Password to setup the Internet
Connection.
2c
Step
2
:
Configuring Using Setup Utility
Step
3
:
Connect to the Internet
Enter your Username and Password given by the
ISP. Depending on the service where you
subscribed, you need to include the suffix
“@singnet” or “@singnet1500” or
“@singnetbusiness” after the username. Click
CONTINUE to proceed.
ISP. Depending on the service where you
subscribed, you need to include the suffix
“@singnet” or “@singnet1500” or
“@singnetbusiness” after the username. Click
CONTINUE to proceed.
3a
Upon successful connection to the Internet, it will
display a summary of the settings, you may save
or print for future reference. Click CONTINUE to
proceed
display a summary of the settings, you may save
or print for future reference. Click CONTINUE to
proceed
3b
It will show info that the internet connection was
successfully established. You may click on the
cube to start surfing or click EXIT to exit the utility
successfully established. You may click on the
cube to start surfing or click EXIT to exit the utility
3C