Dynex 2300-0248 Leaflet

P/N: 2300-0248

5

6

7

Model No.: DX-M200

www.dynexproducts.com

Installation Guide

       Double click on “Control Panel/Modems”, select the “don't

       detect my modem; I will select it from a list” option and

       press the “Next” button.

       Click on the “Have Disk” button from “Install New Modem”

       window and press the “Next” button.

       Windows then asks you to specify where the driver for the

       modem is located. Insert the fax modem drivers diskette

       into your floppy drive, select drive “A:\” and click “OK”.

       Select the product name of fax modem from “Models” list

       box and press the “Next” button.

       Select the available COM port from the list box and press

       the “Next” button.

       You will see the “Your modem has been set up

       successfully” window appear. That means the modem is

       now ready for use.

Note: Windows will notify you that the driver has not passed 

Windows Logo testing. This is normal, and it has been 

verified that the Adapter does work with Windows XP. 

Click Continue Anyway.

The communications software which is included with this 

product comes with its own user's instructions located in the 

readme file. This software will enable you to use your 

modem in both data and fax modes. 

The PC Card fax modem is designed to work with the 

software included with the modem. In addition, the modem 

will operate with most other third-party DOS and Windows 

data fax software applications. Please note the following 

when configuring your fax modem with third-party software.

Many data communication programs require that you select 

a modem during installation. If you do not see a listing for 

this Fax Modem, you should select “Generic Fax Modem” or 

“Standard Fax Modem” as your modem type.

If you are installing a fax program, it may ask you what Class 

of fax modem you have. You should respond by selecting 

“Class 1” or Class 2” (optional, please refer to your User's 

Manual).

This device complies with Part 15 of the FCC rules. Operation 

is subject to the following two conditions:  

(1) This device may not cause harmful interference, and (2) 

This device must accept any interference received, including 

interference that may cause undesired operation.

This is a Class B product. In a domestic environment, this 

product may cause radio interference.