Ericsson WCDMA/HSDPA User Manual

Configuration and Management 
 

To change the W20 IP address or subnet mask, type the new value in the 
corresponding field and click 

 to save the settings. 

Note:  If you change the LAN IP address while connected to the Ericsson 

W20 web pages through a web browser, you will be disconnected. 
You have to redirect the web browser to the new address in order 
to confirm the new settings. Type the new LAN IP address in the 
Address (URL) field and press the 

 key. 

The Connected Devices table includes information about all connected 
LAN devices. 

The MAC (Media Access Control) address of the 
device. 

The IP address of the device. 

The unique name of the device. 

The type of connection, which is either 
Ethernet

 

or 

USB 

The following information is displayed in the Traffic Statistics section on 
the LAN page: 
 

The total size (and number) of transmitted data 
packets on the LAN. 

The total size (and number) of received data packets 
on the LAN. 

The number of invalid data packets. 

The number of packet loss due to too many 
incoming data packets. 

The number of dropped data packets. 

 

Note:  The data size and packet counters have the upper limits of 4 GiB 

and 2

32

 packets (more than 4 billion packets). When these limits 

have been reached, the counters wrap around to zero. 

1/1551-CRH 102 167 PA15  2006-08-16

 23