Ericsson WCDMA/HSDPA User Manual

Configuration and Management 
 

To access a shared file or printer from a PC on your LAN, you may need 
the following information, displayed on the File & Printer Sharing page. 
 

The name of the Ericsson W20 on the local network. 

The common name of all devices sharing the same 
resources on the local network. 

To change the host name or workgroup, type the new name in the 
corresponding field and click 

. 

For information about setting up connections from a PC to shared files or a 
network printer, see section 

The Ericsson W20 supports USB connection of up to two mass storage 
devices at the same time. The included files are shared with all devices on 
the LAN. All local users have full access to the shared files. 

Note:  If the mass storage device contains more than one partition, only 

the first partition is shared. 

Information about file sharing device(s) is displayed on the File & Printer 
Sharing page: 

The name of the shared resource on your local 
network.  

The manufacturer name of the device. 

The speed of the data transmissions between the 
storage device and the Ericsson W20: 
High

 Speed (480 Mbit/s)

, 

Full Speed (12 Mbit/s)

 or 

Low Speed (1,5 Mbit/s) 

To give a file sharing device a specific name, type this name in the 
corresponding Share name field and click 

. 

The Ericsson W20 supports sharing of a network printer, connected to one 
of the USB ports. Depending on the printer type, the installation may 
require some specific drivers, provided by the printer manufacturer, for 
installation on the client PCs. 

1/1551-CRH 102 167 PA15  2006-08-16

 35