Wacom CTE-630BT User Manual

27

27

Some configurations of the tablet come with a printed underlay that can be seen through the transparent 
photo frame.  You can replace the underlay with a favorite photo or design of your own by following these 
steps:

If you would like to create an image that you can use for the tablet underlay, you can use the templates 
provided on the Wacom Pen Tablet Driver CD as a starting point:

1. Insert the Wacom Pen Tablet Driver CD into your computer and locate the T

EMPLATES

 folder.

2. Open the folder to access the template files.  Template files come in various formats that can be modified 

within any graphics application that supports .jpg or .psd formatted files.

3. Choose one of the pre-designed or blank templates.  Then modify it to create your own design.

4. When you are done, print out your new tablet underlay.  Use photo-quality paper for best results.

5. Trim the new underlay to size and place it beneath the tablet photo frame.  See above.

1.

To remove the photo frame, 
slide the two photo frame locks 
located on each side of the tablet 
to the unlocked position (toward 
the top of the tablet).  Then grasp 
the upper edges of the photo 
frame with your finger tips and lift 
the photo frame away from the 
tablet.

2.

Lift away the printed underlay and 
replace it with a new photo or 
design of your choosing.

3.

To replace the photo frame, 
insert the tabs located on the 
lower edge of the cover into the 
slots on the tablet.  Then lower 
the photo frame into place and 
slide the photo frame locks to the 
locked position (towards the 
bottom of the tablet).  This will 
protect your photo or design as 
you work on the tablet.

To create a new tablet underlay, follow 
the tips in the next section.

Photo frame lock 
(one on each side).