Tascam MMR-8 User Manual
Tascam MMR-8 Owner’s Manual • Chapter 3 • MMR-8 Operation
MMR-8
42
To move a loaded track from its current Track index position into the selected Track index or to load a
currently unloaded track into the selected Track index, scroll through the list of available tracks until the
desired track is located. The display will indicate your choice of both the selected track to be moved or
loaded, and the destination Track index. Press the STO key to complete the operation and load the track.
currently unloaded track into the selected Track index, scroll through the list of available tracks until the
desired track is located. The display will indicate your choice of both the selected track to be moved or
loaded, and the destination Track index. Press the STO key to complete the operation and load the track.
Backup State Display
The Backup state is accessed via the Load Track state by choosing (scrolling to) the desired Project and then
pressing SHIFT + SLIP. There are two menu choices that can be displayed, corresponding to two styles of Backup.
Use the Up/Down arrow keys or the Wheel to toggle between the two Backup options. The first Backup option is:
pressing SHIFT + SLIP. There are two menu choices that can be displayed, corresponding to two styles of Backup.
Use the Up/Down arrow keys or the Wheel to toggle between the two Backup options. The first Backup option is:
01234567890123456789
LCD character positions (left to right)
Begin Backup to:
Top: (Operator message)
*Disk X
Bottom: (X is the number of the currently selected
Disk volume, press Trim and use the Up/Down
Arrow keys or Wheel to choose other disks)
The second Backup option is:
01234567890123456789
LCD character positions (left to right)
TapeMode Convert to:
Top: (Operator message)
*Disk X
Bottom: (X is the number of the currently selected
Disk volume, press Trim and use the Up/Down
Arrow keys or Wheel to choose other disks)
Only currently mounted disk volumes will be shown as choices for the target of the backup operation. Press CLR to
cancel the Backup state and return to the Normal state.
cancel the Backup state and return to the Normal state.
Verify State Display
In the Verify state, the display is used for operator interface messages which usually request a Yes/No answer or
require a number to be entered (such as a password) before normal operation can be resumed.
require a number to be entered (such as a password) before normal operation can be resumed.
01234567890123456789
LCD character positions (left to right)
Function Message
Top: (Operator message)
Are you sure (Y/N)?
Bottom: Verification request – press STO for Yes,
press RCL for No, use keypad to enter number, or
press CLR to Cancel and return to previous state
Error State Display
The Error state will cause the ERROR LED to flash red and show a message in the display indicating an action can
not be implemented or gives some other instruction. This state may also present various information messages
indicating system status, disk mount status, an event has timed out, or that some type of operation (such as disk
formatting) is requiring the system to wait until the operation is finished.
not be implemented or gives some other instruction. This state may also present various information messages
indicating system status, disk mount status, an event has timed out, or that some type of operation (such as disk
formatting) is requiring the system to wait until the operation is finished.
01234567890123456789
20 position LCD character positions
Error: nnnn
Top: (nnnn indicates the error message number)
Tttttttttttttttttttt
Bottom: (t indicates a possible text message)
It is necessary to clear the Error state to return the front panel keys to normal operation. Most error
messages can be cleared from the display by pressing the CLR key.
messages can be cleared from the display by pressing the CLR key.