Olympus VN-770 User Manual

[ON]: Enables the alarm playback 

function.
[OFF]: Disables this function.

1  Select [ON] and press the `OK 

•  The “hour” will flash on the 

display.

  Press the `OK or 9 button to 

•  Repeat steps 2 and 3 to set the 

“minute”.

[ONCE]: Alarm playback will 

be performed only once at the 

specified time.
[DAILy]: Alarm playback will be 

performed at the specified time 

every day.

5  Press the `OK or 9 button to 

"
•  The alarm tone stops automatically 

if no button is pressed within 5 

minutes after the alarm starts. The 

file is not played back in this case.

•  If the starting times for timer 

recording and alarm playback 

are set for the same time, timer 

recording will have priority.

[ON]: LED light will be set.
[OFF]: LED light will be canceled.

The recorder beeps to alert you of 

button operations or warn you of 

errors.
[ON]: Enables the beep function.
[OFF]: Disables this function.
"
•  If the alarm playback function has 

been set, the alarm will sound at 

the scheduled time even if the 

system sounds are disabled.

Locking a file keeps important data 

from being accidentally erased. 

Select a file for the function before 

locking.
[ON]: Locks the file and prevents it 

from being erased.
[OFF]: Unlocks the file and allows it 

to be erased.

Files with large capacities and long 

recording times can be divided to 

make them easier to be managed. 

Stop the file at the position in which 

you want to divide it and apply the 

setting.
[yES]: Enables the file division.
[NO]: Cancels this function.

1  Select [yES] and press the `OK 

•  File division begins and [DIVIdE] 

flashes on the display.

"
•  The recorder cannot divide files 

when the number of files in the 

folder reached 200.

•  Locked files cannot be divided.

•  Do not remove the battery while 

dividing a file. This may damage 

the data.

You can move files recorded in 

folders [&], ['], [(] and [)] to other 

folders. The moved file is added to 

the end of the destination folder. 

Select a file for the function before 

moving.
[yES]: Enables the file movement.
[NO]: Cancels this function.

1  Select [yES] and press the `OK 

•  Current folder and file number 

will flash on the display.

  Press the 9 or 0 button to 

  Press the `OK button.

•  The destination folder and the 

number of the moved file appear 

on the display, and moving is 

completed.

"
•  If the destination folder is full 

(200 files), [FULL] appears on the 

display, and you cannot move the 

file to that folder.

•  A file cannot be moved to the same 

folder.

•  Do not remove the batteries 

during moving. This may damage 

the data.

If you format the recorder, all files 

will be removed and all function 

settings will return to defaults except 

date and time settings. For important 

recorded content, we recommend 

you to make a note of it before 

formatting the recorder.
[yES]: Starts formatting the recorder.
[NO]: Cancels this function.

1  Select [yES] and press the `OK 

•  [NO] will flash on the display.

`

•  Formatting begins and 

[FORMAT] flashes on the display.

•  [END] appears when formatting 

ends.

"
•  It may take over 10 seconds to 

complete processing. Never 

remove batteries during this time 

because data may be corrupted. In 

addition, replace the batteries with 

new ones in order to ensure that 

the batteries will not run out while 

processing.

•  When the recorder is formatted, all 

the saved data, including locked 

files, are erased.

Q1:  The power cannot be turned on.

A1:  • The batteries may be depleted.

 

• The batteries may be inserted 

incorrectly.

 

Check = and - before inserting 

new batteries.

 

• Are the terminals of the batteries 

soiled?

 

If so, clean them with a dry cloth.