JVC PU30425 User Manual

6

q

6

q

PAUSE/

R.A. EDIT

REMOTE

PAUSE

0

1

3

This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.

Audio signal

Video signal

MAKE CONNECTIONS

Connect your recorder’s VIDEO OUT and AUDIO OUT
connectors to the VIDEO IN and AUDIO IN connectors
on the recording deck, and connect your recorder’s
PAUSE/R.A. EDIT connector to the PAUSE connector on
the recording deck.

● If the recording deck doesn’t have a PAUSE connec-

tor, connect to the R.A. EDIT connector instead.

● The Mini-plug cable is a mono 3.5 mm mini-plug to

mono 3.5 mm mini-plug connector.

PREPARE FOR EDITING

Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.

LOAD SOURCE CASSETTE

Insert the source cassette into your recorder.

START SOURCE PLAYBACK

Press PLAY.

ACCESS R.A. EDIT FUNC-

TION

Press R.A. EDIT.

● The screen is superimposed on the video playback in

step 6.

LOCATE EDIT-IN POINT

Find the point on the source
tape from where you want
the edited scene to begin by
pressing PUSH JOG        or
using the SHUTTLE ring or
the JOG dial, then press
IN/OUT on the remote
control.

● The edit-in point is

registered in memory and appears on the screen.

● You can also perform an Index Search (if index marks

have been previously recorded on the tape at the
desired points) to find the points you want, but this
will result in reduced accuracy.

Your VCR

Another VCR

(w/PAUSE conector)

Mini-plug Cable
(Not provided)

=1

fi %