JVC PU30425 User Manual

1

2

4

5

3

6

8

0

7

9

2

1

3

Your recorder needs to memorise all necessary stations in preset
positions in order to record TV programmes. ATS+ (Auto Tuning
System) automatically assigns all receivable stations in your
area to call them up with the TV PROG. buttons without going
through any vacant channels.

The following procedure describes how to select automatic
channel setting.

6

q

fi%

fi

fi

● Fine tuning is performed automatically when you select

“AUTO CH SET”. If you want to perform it manually, refer to
page 44.

● To set the tuner manually, refer to “Storing Channels Manually”

(

Z

 pg. 41).

TURN ON THE RECORDER

Press OPERATE.

ACCESS CH SET MODE

MENU

Press and hold CH SET for
more than 2 seconds. The
Ch. Set Mode menu screen
to the right appears.

SELECT MODE

“AUTO CH SET” is the
necessary mode for this
procedure, so simply press
OK to enter the selection.

● The Auto Ch. Set screen

appears, and remains on
screen while the
recorder searches for
receivable stations.

VIEW CONFIRMATION

SCREEN

The stations your recorder
located appear on a
Confirmation screen —
preset positions (PR),
presets (CH) and station
names (ID – 

Z

 pg. 45). To

view the next page of the
listing, press PUSH
JOG

%fi

. The blueback

screen and the program
currently being broadcast by the highlighted station
appear alternately for 5 seconds each.

RETURN TO NORMAL

SCREEN

Press CH SET.

● Using the Confirmation screen, you can skip or add

preset positions, enter station names and perform
other operations. Refer to page 41 for the procedures.

● Depending on reception conditions, the stations may

not be stored in order, and the station names may not
be stored correctly.

5∞] : SELECT

5∞   ] : SELECT

5 ∞

%

%