Olympus DM-550 User Manual
61
4
a
EN
M
e
n
u s
et
et
tin
g m
e
th
e
th
o
d
[Time] setting:
1 Press the 9 or 0 button to
select "Hour"and "Minute" in the
[Start Time] and "Hour" and "Minute"
in the [Stop Time].
[Start Time] and "Hour" and "Minute"
in the [Stop Time].
2 Press the + or – button to set.
3 Press the OK button to exit [Time]
selection.
[Rec Mode] setting:
Regardless of the regular [Rec Mode] (
P.47), timer recording will start in a set
recording mode.
P.47), timer recording will start in a set
recording mode.
1 Press the + or – button to select a
recording mode.
2 Press the OK or 9 button.
3 Press the + or – button to select a
recording rate.
4 Press the OK button to exit Recording
mode selection.
[Folder] setting:
1 Press the + or – button to select the
destination to save to (Memory) (For
DM-550)
DM-550)
2 Press the OK or 9 button to move
to the [Folder] setting.
3 Press the + or – button to select the
destination to save to (Folder).
4 Press the OK button to exit [Folder]
setting selection.
[Mic Sense] setting:
Regardless of the recorder’s microphone
sensitivity setting ( P.47), timer recording
will start at a set microphone sensitivity.
sensitivity setting ( P.47), timer recording
will start at a set microphone sensitivity.
1 Press the + or – button to select from
[High], [Middle], and [Low].
2 Press the OK button to exit [Mic
Sense
] selection.
6
Completing the setting.
1 Pressing + or − button to select
[Finish].
2 Press the OK button to complete the
setup screen.
Programmed settings will be applied
and the screen will return to the preset
number selection menu. If the [On/Off]
setting is set to [On],
and the screen will return to the preset
number selection menu. If the [On/Off]
setting is set to [On],
will appear on
the display.
a When setting to [On]
Menu setting method
When setting other preset numbers,
repeat Steps 2 through 6.
When the 9 button is pressed in the
Select in Advance Menu, the settings
selected can be confirmed.
repeat Steps 2 through 6.
When the 9 button is pressed in the
Select in Advance Menu, the settings
selected can be confirmed.
7
Press the F2 or STOP 4 button to
complete the setting.
• The
will appear on the display.
Notes
• If the recorder is in use at the preset start
time, the timer recording will start directly
after stopping the recorder.
after stopping the recorder.
• Even if the power if turned off or the recorder
is put on Hold, timer recording will start at a
specified time.
specified time.
• If three timer recordings have the same
starting times, [Preset 1] has the highest
priority and [Preset 3] has the lowest.
priority and [Preset 3] has the lowest.
• If the starting time for timer recording and
alarm playback ( P.64) is set for the same
time, timer recording will have priority.
time, timer recording will have priority.
• If the batteries run out while recording
based on the timer setting, the recorder will
stop recording. Check the battery power
before starting the timer recording.
stop recording. Check the battery power
before starting the timer recording.