Sony 1080i User Manual
Chapter 3 Dubbing/Editing
40
Chapter 3
Dubbing/Editing
Setting the Time Code and User Bits
1
Press the MENU button to display the menu.
(You can set [TC FORMAT] only when [50i/60i
SEL] on the [OTHERS] menu is set to 60i.)
SEL] on the [OTHERS] menu is set to 60i.)
2
Press the f/F buttons to select [TC/UB SET], then
press the EXEC button.
press the EXEC button.
3
Press the f/F buttons to select [TC PRESET],
then press the EXEC button.
then press the EXEC button.
4
Press the f/F buttons to select [PRESET], then
press the EXEC button.
press the EXEC button.
5
Set the first two digits. Press the f/F buttons to
select the number, then press the EXEC button.
select the number, then press the EXEC button.
6
Repeat step
5
to set the other digits.
7
Press the f/F buttons to select [OK], then press
the EXEC button.
the EXEC button.
The time code value is set.
8
Press the f/F buttons to select [OK], then press
the EXEC button.
the EXEC button.
The menu display returns to that of step
2
.
This unit can set, display, record and play back the
time code and user bits.
time code and user bits.
Notes
• When the HDV formatted signals are recorded from
the HDV/DV jack on this unit, a user bit is copied.
However, this bit cannot be preset (the user bit is
displayed as “– – – – – – – – ”). The time code is
set in accordance with the [TC MAKE] setting. You
cannot copy the time code of a source tape.
However, this bit cannot be preset (the user bit is
displayed as “– – – – – – – – ”). The time code is
set in accordance with the [TC MAKE] setting. You
cannot copy the time code of a source tape.
• When images recorded in the DVCAM/DV format
are input from the HDV/DV jack, you can preset a
user bit time code on this unit. However, you cannot
copy the user bit and time code of a source tape.
user bit time code on this unit. However, you cannot
copy the user bit and time code of a source tape.
• For a tape recorded both in HDV and DVCAM/DV
formats, the time code may become garbled at a
connecting portion between scenes on the tape.
connecting portion between scenes on the tape.
• If you play back an HDV tape without signals
recorded, the time cord may become disordered.
• The time code cannot be reset on this unit from a
remote controller equipped with a counter reset
function.
function.
Using the Internal Time Code
Generator
Generator
You can set the initial time code value generated by
the internal time code generator. In addition, you can
set the user bits to record data such as the date, time,
scene number, reel number, or other useful
information. The time data settings are set by using the
menu.
the internal time code generator. In addition, you can
set the user bits to record data such as the date, time,
scene number, reel number, or other useful
information. The time data settings are set by using the
menu.
For details on the menu, see “Chapter 4 Adjusting and
Setting Through Menus” on page 45.
Setting Through Menus” on page 45.
To set the initial time code value
This section describes how to set the time code’s initial
value.
value.
Note
To set the initial time code value, you need to set [TC
MAKE] on the [TC/UB SET] menu to [PRESET]
beforehand. (p. 51)
MAKE] on the [TC/UB SET] menu to [PRESET]
beforehand. (p. 51)
AUDIO SET
AUDIO MONI
AUDIO MIX
AUDIO MODE
AUDIO LOCK
AUDIO LIMIT
AUDIO MONI
AUDIO MIX
AUDIO MODE
AUDIO LOCK
AUDIO LIMIT
[
MENU
]
: END
TC / UB SET
[
MENU
]
: END
RETURN
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TIME REC
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TIME REC
00:00:00:00
TC PRESET
00:00:00:00
[
MENU
]
: CANCEL
RETURN
PRESET
RESET
PRESET
RESET
TC PRESET
00:00:00:00
[
MENU
]
: CANCEL
RETURN
PRESET
RESET