Sony CD-UX71 User Manual

ICD-UX71/UX81/UX71F/UX81F/UX91F 4-114-023-41(1)

GB

When you use the IC recorder for the 

first time, or after you have not used 

the IC recorder for a certain time, it is 

recommended that you charge the 

battery repeatedly until “

” is displayed.

If the remaining battery/charging 

indicator is not displayed, charging has 

not been done properly. Proceed from 

step 1 again. 

* This is an approximation for the time it takes 

to charge from no remaining battery power 

to full battery power at room temperature. 

It varies depending on the remaining power 

and the condition of the battery. It also takes 

more time if the temperature of the battery 

is low, or if the battery is charged while you 

are transferring data to the IC recorder.

If the IC recorder cannot be connected to 

your computer directly, use the supplied 

USB connection support cable.

Follow the procedures below; otherwise, 

data may be damaged.

USB connector of the computer.
On the Windows screen, left-click 

“Safely Remove Hardware” on the 

taskbar, and click “Safely remove USB 

Mass Storage Device.” 
On the Macintosh screen, drag the “IC 

RECORDER” on the desktop to “Trash” 

and drop it there.
For details on disconnecting the 

IC recorder, refer to the operating 

instructions supplied with your 

computer.

You can charge the rechargeable battery 

by connecting the IC recorder to an AC 

outlet using a USB AC adaptor (not supplied) 

(pages 71, 106).
When replacing the battery, messages 

recorded or alarm settings are not erased 

even when you remove the battery.
When replacing the battery, the clock 

continues moving for about 3 minutes after 

you remove the battery.

While “

” or “

” is flashing instead 

of the remaining battery/charging indicator, 

you cannot charge the battery. Charge 

the battery in an environment with a 

temperature of 5 °C - 35 °C.











