Royal Sovereign 900N 1 User Manual

1. HOT LAMINATING

1. Press the power button.

2. Please refer Information Panel on the front of product.

3. Select a memory setting by pressing the and button.

4. It is ready when the LCD window shows and the buzzer rings three times.

5. After Insert document or photograph to be laminated into a laminating pouch,

insert pouch squarely into opening slot.

6. Finished laminated pouch will exit through rear of machine.

7. Emerging laminated document is hot to touch. Please handle it to be cooled down.

(If document is not laminated well, do lamination again.)

8. When the machine is on for an extended period of time, use a slightly lower

temperature setting as the internal temperature of the machine may actually be

higher than the preset temperature, which may cause the document may ripple

or bend.

9. When you are finished laminating, press the power button to turn off.

* When continuously laminating, the ready signal ( ) may disappear and the

waiting signal may be displayed on LCD window.

At this time, if pouch is being laminated, finish laminating and then

laminate new one after is showed.

* Do not laminate empty or thin pouch on a thick film setting.

The pouch could stick to the roller.

* Do not unplug laminator while laminating.

This could be fatal for the rollers due to the high internal temperature.

LAMINATING STEPS

***USEFUL INFORMATION***