JVC MP-XP731GB User Manual
62
EN
HARDWARE
Using an External Monitor
To attach an external monitor to your PC, use the MP-VGX2E external display cable.
Connecting an external monitor
When you connect an external monitor to your PC, it looks like an ordinary desktop PC. You can
use the monitor by just connecting it with the MP-VGX2E cable. You can display images on the
external monitor for other people and you can watch them on the LCD panel of your PC.
use the monitor by just connecting it with the MP-VGX2E cable. You can display images on the
external monitor for other people and you can watch them on the LCD panel of your PC.
For switching the display between the external monitor (CRT) and LCD panel of your PC, press
the Fn + F10 keys, and the mode will be switched in the following sequence:
the Fn + F10 keys, and the mode will be switched in the following sequence:
LCD (LCD panel of PC) CRT (external monitor) LCD + CRT
Notes
•
To disconnect the external display connecting cable (MP-VGX2E), be absolutely sure to
pull it straight out while pressing the PUSH button at the same time.
•
No switching results when the Fn + F10 keys are pressed if the CRT (external monitor)
is not connected.
•
Do not disconnect the VGA cable during operation in the CRT (external monitor)
mode. The mode will not be switched by operating the Fn + F10 keys while this cable
is disconnected. To enable the operation of these keys in this state, the VGA cable
must be re-connected. It is a good idea to switch to the LCD + CRT mode first before
disconnecting the VGA cable.
is disconnected. To enable the operation of these keys in this state, the VGA cable
must be re-connected. It is a good idea to switch to the LCD + CRT mode first before
disconnecting the VGA cable.
Face the PUSH button
upward.
upward.